CWF Clear Wood Finish (waterbase)
Restore and protect your wood's natural beauty with CWF-UV. It revitalizes gray, weather-beaten wood, restoring the rich, warm appearance of natural wood. CWF-UV also blocks out harmful UV rays that fade and prematurely age your exterior wood. The three finish colors of CWF-UV (clear, cedar and redwood) penetrate deep into wood for long-lasting beauty.
Bring your wood back to life
If your exterior wood looks more like driftwood, restore and protect its natural beauty with CWF-UV Clear Wood Finish. Water-based CWF-UV revitalizes grey, weather-beaten wood, restoring the rich, warm appearance of natural wood. Unlike a surface sealer, the natural oils in CWF-UV penetrate deep into the wood grain, reviving your wood's beauty while further protecting it against moisture damage.
A sunscreen for your wood
CWF-UV also blocks out harmful U.V. rays that fade and prematurely age your exterior wood. Because CWF-UV penetrates, it protects your wood without cracking, peeling, or flaking. Best of all, one litre covers up to 6 square metres of wood for affordable protection.
How to apply CWF-UV
CWF-UV should be used only on exterior wood that has weathered at least one year.
Clean your wood first with Dekswood Cleaner and Brightener. Let dry for 2-3 warm, dry days before applying CWF-UV.
NOTE: If your deck has an old finish that must be removed, use PowerLift Deck Stain & Finish Remover according to label directions.
Cover all areas you don't want to coat. Apply one coat of CWF-UV with a brush or roller. Let penetrate up to 20 minutes. Backbrush for even penetration and uniformity of coverage. Wipe up or brush out puddles to avoid shiny areas. Allow drying time from 24 to 48 hours. For continued protection, apply CWF-UV once every two years. Clean deck annually with Dekswood. For ease of application, CWF-UV has a milky appearance when first applied. This shows you which areas have already been treated and which have not. As it dries, the milkiness disappears to reveal a beautiful, deep matte finish with the natural grain of your wood.
CWF-UV coverage, cleanup and storage
One gallon of CWF-UV will cover from 150 to 250 square feet.
Clean up brushes and tools with soap and water.
Keep container closed tightly when not in use. Keep from freezing.
CWF-UV meets all environmental requirements.
Use CWF-UV to restore the original radiance to cedar weatherboards, softwood fencing, log homes and other fine wood'.
CWF is not suitable for hardwood.
Available sizes
CWF-UV 4L, 20L
