spacer
WHERE TO BUY
ENTER 4 DIGIT POSTCODE
 
aus
  international
Flood Australia.
lift off silicone and acrylic caulk and foam sealant remover

Mötsenböcker’s Lift Off® Silicone and Acrylic Caulk and Foam Sealant Remover

This water–based product removes wet or dry silicones, acrylic based caulks, polyurethane foams and glues, expansion foams, construction adhesives and acrylic caulks. The new and safe technology works to remove both fresh and cured sealants from tools, hands, hard surfaces, flooring, fabric, carpet, ceramic, stone, wood, plastic, metal, vinyl and more!

Works on: Wet or Dry Acrylic–Based Foams • Silicones • Foam Sealants • Caulk • Polyurethane Foams & Glues • Expansion Foams • Acrylic Caulks • Construction Adhesives & More!

Features and benefits

Silicone, Acrylic Caulk & Foam Sealant Remover
Green Cross Certified
Low–VOC
Water–Based
Biodegradable
Safe for the Environment & User

Safe on:

Hands • Tools • Fiberglass • Hard Surface • Flooring • Fabrics • Carpet • Ceramic • Stone • Wood • Plastic • Metal • Vinyl • Foam Application Equipment & More!

How to use

For Wet Sealant (Silicones, Caulks & Foams):
1. Test for colorfastness of surface by applying Lift Off to an inconspicuous area.
2. Remove as much of the wet sealant as possible without spreading around.
3. Use a clean paper or disposable cotton towel.
4. Apply LIFT OFF directly to sealant wait 60 seconds.
5. Gently agitate with either a plastic or metal scraper (or back end of toothbrush works well on fabrics).
6. Wipe thoroughly clean with paper or cotton towel.
7. Repeat as necessary to completely remove all excess sealant.
8. Thoroughly rinse area to complete process.
 
For Dry Sealant (Silicones, Caulk & Foams):
1. If possible, remove as much of the dry sealant by safely scraping clean.
2. Test for colorfastness of surface by applying Lift Off to an inconspicuous area.
3. Apply Lift Off directly to sealant and wait 2-3 minutes.
4. Remove as much sealant as possible.
5. Gently agitate with either a plastic or metal scraper (or back end of toothbrush works well on fabrics).
6. Wipe thoroughly clean with paper or cotton towel.
7. Repeat as necessary to completely remove all excess sealant.
8. Thoroughly rinse area to complete process.

Please Note: When removing sealants, Lift Off does not dissolve sealants, but rather breaks the molecular bond allowing them to be removed in pieces.
 
Vertical Surfaces:
1. Apply Lift Off directly to a clean white cloth.
2. Hold moistened cloth directly to sealant you wish to clean for at least 60 seconds.
3. Use either a plastic or metal scraper or cloth to break sealant apart and remove.
4. Repeat as necessary.
 
CAUTION: HARMFUL IF SWALLOWED. EYE AND SKIN IRRITANT.
Avoid contact with eyes and skin. For eye contact, flush with water for at least 15 minutes. Obtain medical attention. For skin contact wash thoroughly with soap and water. Do not ingest. If swallowed, do not induce vomiting. Immediately call a physician.

DO NOT FREEZE. KEEP OUT OF REACH OF CHILDREN AND PETS

CAUTION:
Not recommended for use on painted surfaces or non-colourfast materials. Always test on an inconspicuous area.

View Mötsenböcker’s Lift Off® Silicone and Acrylic Caulk and Foam Sealant Remover Video