spacer
WHERE TO BUY
ENTER 4 DIGIT POSTCODE
 
aus
  international
Flood Australia.
Wood care and painting solutions.


fauxguide














penetrol

floetrol

ESP

e-b emulsa-bond1

paint odour eliminator

VC175 tropical mould killer

 

Why use a paint additive?

To overcome paint challenges, without diluting your paint! Under ideal conditions (mild temperatures, average relative humidity, a trouble-free painting surface and a lack of time constraints) a good paint doesn't really need any help, but in many cases, including additives to paint will maximise your success.

So why blend in an additive to paint? With just about any painting project, you may be faced with weather and surface condition problems or time-to-dry challenges, causing your results to be less than optimal. Some problems include extreme hot or cold temperatures, low or high humidity, extra time needed to complete a special faux finishing effect, or encountering a surface that has excessive chalking or dusting or that is highly porous. These conditions can cause noticeable brush marks in paint, problems with paint not adhering and a general reduction in your painting productivity.

Mixing in Flood® additives to paint helps solve these painting problems by eliminating brush and roller marks on your painting surface and by improving paint penetration and adhesion. Flood additives also allow paints to overcome difficult weather and surface conditions without diluting the paint or changing its color or performance. Trust Flood additives to improve your painting productivity, enrich your paint's performance and ensure beautiful results.

Oil-Based Paint Additive

Penetrol® is an oil paint additive that helps paint flow more smoothly to eliminate paint brush marks while also allowing you to paint productively in high/low temperature or humid weather conditions. Also helps improve paint and primer surface penetration.

Acrylic Paint Additive

Floetrol® is an acrylic paint additive that helps paint flow better, enabling you to paint without brush marks while allowing paint to adjust to difficult weather conditions. Also extends paint dry time to create faux finishing effects.

ESP Easy Surface Prep

ESP Easy Surface Prep cleans the old surface and leaves a permanent bonding film to which paint will adhere firmly - all in one application. Wipe it on. Wipe it off. Paint after 90 minutes. The paint will stick everytime. Guaranteed!

Exterior Acrylic Paint Additive

E-B Emulsa-Bond™ is an exterior acrylic paint additive that improves paint adhesion and helps paint stick to hard-to-coat surfaces. It's ideal for painting chalky or dusty surfaces or any surfaces where paint not adhering is a concern.

Paint Odour Eliminator

Taking care of offensive paint odours is part of our business. The Flood Company’s Paint Odour Eliminator P.O.E. has a proven track record in paint odour elimination for over 20 years. P.O.E. is one considered the most effective, yet economical, paint odour remover suitable for both the tradesman and the D.I.Y. enthusiast. Easy to use and long lasting, it affects an odour knock down of up to 95% in Acrylic and oil based paints. P.O.E. is not just a mask or cover-up but chemically neutralises odours by making changes in their molecular structure when activated by Oxygen making the odours simply disappear.

VC175 Tropical Mould Killer

In damp or humid conditions most surfaces discolour and stain with unsightly mould and algae growth which, unless checked, continues to be a problem for the life of the surface. The time to treat surfaces against mould growth is when paint is applied. A few drops of VC175 added to the paint and your surfaces will stay like new without unsightly, allergy causing and musty smelling mould.