MARINE PENETROL WITH STAIN, PAINT AND PRIMERS

MARINE PENETROL MAKES IT EASY TO MAKE YOUR OWN WOOD STAIN

When tinted with non-fading oxides or universal tint, Marine Penetrol can give a wide variety of wood tone effects to plywood, hardwood or pale timber. Where a satin sheen is required add some varnish until the desired gloss level is reached. To restore old, faded, dull stain just apply 1 to 2 coats of Marine Penetrol. It waterproofs the wood at the same time.

MARINE PENETROL MAKES IT EASY TO GET GREAT RESULTS WITH WOOD PRIMERS
	Wood surfaces vary in porosity from old and pitted to new and tight, smooth to rough. Wood primers are formulated for the average surface and cannot be expected to work equally well on all degrees of porosity. Marine Penetrol added to wood primers and oil based stains ensures paint penetration and adhesion to wood in any condition.

MARINE PENETROL MAKES IT EASY TO GET THE PERFECT PAINT JOB
	Stir paint thoroughly and apply. When paint ‘pulls’ or sets too fast add Marine Penetrol until the paint spreads smoothly and evenly. If paint is very thick, or in hot weather, 20% to 30% may be added. Let the brush or the roller be your guide. You will achieve a mirror finish when spraying marine enamel fortified with Marine Penetrol.

THE AMOUNT OF PENETROL NEEDED FOR EASY APPLICATION WILL NOT CHANGE THE APPEARANCE OF THE PAINT