The Flood Company Australia

	Mötsenböcker’s Lift Off #4 Graffiti Remove : How to Use For Hard and Soft Surfaces such as: Street Signs, Plexiglas® & Cars: 1. Spray area damaged by graffiti or paint thoroughly. 2. Wipe with clean paper or cloth towel. Repeat if necessary. For Porous Surfaces such as: Concrete & Brick: 1. Spray area damaged by graffiti or paint thoroughly; wait at least 3 mintues. 2. Use brush to agitate (loosen) dried paint. 3. Hose off with water or use pressure washer. Repeat if necessary. For best results on high–poracity substrates (Concrete, Brick, Stucco): 1. Follow step 1 above. 2. Use our patented process in conjunction with a high–pressure water system to remove paint or graffiti. Ask your dealer/manufacturer representative for details about this process and video. CAUTION: HARMFUL IF SWALLOWED. EYE AND SKIN IRRITANT. USE UNDER WELL–VENTILATED CONDITIONS. KEEP FROM OPEN FLAME OR SPARK. Avoid contact with eyes and skin. For eye contact, flush with water for at least 15 minutes. Obtain medical attention. For skin contact, wash thoroughly with soap and water. Do not ingest. If swallowed, do not induce vomiting. Immediately call a physician. Contains acetone. DO NOT FREEZE • KEEP OUT OF REACH OF CHILDREN AND PETS The warranty for this quality-tested product is limited to purchase price. No other guarantee is furnished or implied. CAUTION: Always test on inconspicuous area first. Not recommended for use on latex painted walls, non–colorfast materials or woodwork.		Lift Off #4 more information: • Introduction • MSDS (PDF Download) • How to Use • Testimonials • Eco-Friendly	email: info@floodaustralia.com IN AUSTRALIA For more information and assistance with painting problems